Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
▀ isr-capability
▄ Command Line Interface Reference, StarOS Release 18
7326
isr-capability
Enables or disables the Idle-mode Signaling Reduction (ISR) feature on the MME service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
[ no | default ] isr-capability
default
Sets the ISR feature to the default setting (disabled) on MME service.
no
Disables the ISR feature on MME service.
Usage
Use this command to enable or disable the ISR feature on the MME service. When enabled, the MME can
perform ISR functions with a peer SGSN which also supports ISR.
Refer to the Idle-mode Signaling Reduction chapter in the MME Administration Guide for more information
about this command
perform ISR functions with a peer SGSN which also supports ISR.
Refer to the Idle-mode Signaling Reduction chapter in the MME Administration Guide for more information
about this command
Important:
This functionality is a license-controlled feature. A valid feature license must be installed to enable
Idle-mode Signaling Reduction.