Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
plmn-id ▀
Command Line Interface Reference, StarOS Release 18 ▄
7383
plmn-id
Configures the Public Land Mobile Network (PLMN) identifier for this MME service. The PLMN identifier consists of
the Mobile Country Code (MCC) and Mobile Network Code (MNC). A single PLMN ID can be configured per MME
service.
the Mobile Country Code (MCC) and Mobile Network Code (MNC). A single PLMN ID can be configured per MME
service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
[ no ] plmn-id mcc mcc_value mnc mnc_value
no
Removes the configured PLMN identifier for this MME service.
Caution:
Removing the PLMN identifier is a disruptive operation; the MME service will be restarted.
mcc
mcc_value
Specifies the mobile country code (MCC) portion of the PLMN identifier as an integer from 100 through 999.
mnc
mnc_value
Specifies the mobile network code (MNC) portion of the PLMN identifier as a 2- or 3-digit integer from 00
through 999.
through 999.
Usage
Use this command to set the PLMN identifier for this MME service.
Caution:
Changing or removing the PLMN identifier is a disruptive operation; the MME service will be
restarted.
One PLMN identifier is supported per MME service.
Important:
To configure additional PLMN IDs for this MME service, refer to the
network-sharing
command
described in this chapter.
Example