Cisco Cisco Packet Data Gateway (PDG)
PCC-QoS-Profile Configuration Mode Commands
▀ qci
▄ Command Line Interface Reference, StarOS Release 18
7796
qci
This command sets the QoS Class Identifier (QCI) for PCC-QoS-Profile which is to use for Subscriber profile in PCC-
Service instance on IPCF node.
Service instance on IPCF node.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC QoS Profile Configuration
configure > context context_name > pcc-service service_name > qos-profile profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-qos-profile)#
Syntax
[no] qci qci_id
no
Removes the configured QCI value set for PCC-QoS-Profile for PCC-Service instance on IPCF node.
qci
qci_id
Sets the QoS Class Identifier for a PCC-QoS-Profile which is to use for Subscriber profile in PCC-Service
instance on IPCF node.
instance on IPCF node.
qci_id
must be an integer from 1 through 255.
Usage
Use this command to set the QoS Class Identifier for PCC-QoS-Profile which is to use for Subscriber profile
in PCC-Service instance on IPCF node.
in PCC-Service instance on IPCF node.
Example
Following command sets the QCI
101
for PCC-QoS-Profile instance on IPCF node.
qci 101