Cisco Cisco ASR 5700
HSGW Service Configuration Mode Commands
dns-pgw ▀
Command Line Interface Reference, StarOS Release 17 ▄
6261
dns-pgw
Identifies the location of the DNS client to the HSGW service and enables/disables P-GW load balancing using DNS
SRV lookup.
SRV lookup.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration
configure > context context_name > hsgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hsgw-service)#
Syntax
dns-pgw { context name | selection { topology [ weight ] | weight } }
[ default | no ] dns-pgw { context | selection { topology [ weight ] | weight } }
default
Returns the command to its default setting of the current context.
By default, topology will be enabled and weight will be disabled.
By default, topology will be enabled and weight will be disabled.
no
Removes the configured DNS client context name or P-GW DNS selection criteria from this service.
context name
Specifies an existing context in which the DNS client is configured as an alphanumeric string of 1 through 79
characters.
characters.
selection { topology [ weight ] | weight }
Specifies P-GW DNS selection criteria.
topology
: Enables topology selection, which selects a P-GW topologically closer to the HSGW.
topology weight
: Enables topology selection with weight.
weight
: Enables selection with weight only when both preference values are the same; disables topology
selection.
Usage
Use this command to identify to the HSGW service the context where the DNS client is configured. The DNS
client is used to identify an FQDN for the peer P-GW. This command defaults to the same context as the
HSGW service.
In addition, this command enables and disables P-GW load balancing using DNS SRV lookup by defining P-
GW DNS selection criteria.
client is used to identify an FQDN for the peer P-GW. This command defaults to the same context as the
HSGW service.
In addition, this command enables and disables P-GW load balancing using DNS SRV lookup by defining P-
GW DNS selection criteria.