Cisco Cisco ASR 5700
Link Configuration Mode Commands
mtp2-lssu-len ▀
Command Line Interface Reference, StarOS Release 17 ▄
6827
mtp2-lssu-len
This command sets the length of the link status signal unit (LSSU) which carries link status information used to manage
link alignment and indicate the status of the signaling points to each other. This command is only available for lowspeed
or highspeed narrowband link-types.
link alignment and indicate the status of the signaling points to each other. This command is only available for lowspeed
or highspeed narrowband link-types.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Linkset Configuration > Link Configuration
configure > ss7-routing-domain domain_id variant var_type > linkset id linkset_id > link
id link_id
id link_id
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-linkset-linkset_id-link-link_id)#
Syntax
mtp2-lssu-len #_octets
default mtp2-lssu-len
default
Using this keyword with the command resets the length to the default of 1 octet.
#_octets
Sets the number of octets for the length of the LSSU.
#_octets
: Must be either 1 or 2.
Usage
Use this command to define the maximum amount of link status information that is to be shared between
signaling points.
signaling points.
Example
You can use the following command to set the LSSU length to 2 octets - the maximum length:
mtp2-lssu-len 2