Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
▀ rau-inter-plmn
▄ Command Line Interface Reference, StarOS Release 17
2056
97 - Message type non-existent or not implemented
98 - Message type not compatible with state
99 - Information element non-existent or not implemented
100 - Conditional IE error
101 - Message not compatible with the protocol state
111 - Protocol error, unspecified
user-device-release { before-r99 | r99-or-later } failure-code code
Default: Disabled
Enables the SGSN to reject an Inter-RAU procedure based on the detected 3GPP release version of the MS
equipment and selectively send a failure cause code in the reject message. The SGSN uses the following
procedure to implement this configuration:
Enables the SGSN to reject an Inter-RAU procedure based on the detected 3GPP release version of the MS
equipment and selectively send a failure cause code in the reject message. The SGSN uses the following
procedure to implement this configuration:
1. When Attach Request is received, the SGSN checks the subscriber’s IMSI and current location
information.
2. Based on the IMSI, an operator policy and call control profile are found that relate to this Attach
Request.
3. The call control profile is checked for access limitations.
4. Attach Request is checked to see if the revision indicator bit is set
if not, then the configured common failure code for reject is sent;
if set, then the 3GPP release level is verified and action is taken based on the configuration of
this parameter
One of the following options must be selected and completed:
before-r99
: Indicates the MS would be a 3GPP release prior to R99 and an appropriate failure code
should be defined.
failure-code code
: Enter an integer from 2 to 111.
r99-or-later
: Indicates the MS would be a 3GPP Release 99 or later and an appropriate failure code
should be defined.
failure-code code
: Enter an integer from 2 to 111.
Usage
Use this command to configure the restrictions and function of the inter-RAU procedure occurring across
RNCs or BSSs where the PLMN changes. For example:
RNCs or BSSs where the PLMN changes. For example:
inter-IuPS RAU, where the two IuPSs have different PLMNs
inter-GPRS RAU, where the two GPRSs have different PLMNs
inter-RAT RAU (2G > 3G), where the IuPS/GPRS services have different PLMNs
inter-RAT-RAU (3G > 2G), where the IuPS/GPRS services have different PLMNs
Example
default rau-inter allow access-type gprs location-area-list instance 1