Cisco Cisco Packet Data Gateway (PDG)
APN Profile Configuration Mode
ip context-name ▀
Command Line Interface Reference, StarOS Release 17 ▄
1511
ip context-name
Configure the name of the context where the IP pool configuration needs to be obtained from.
Product
SaMOG
Privilege
Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
ip context-name context_name
no ip context-name
no
If previously configured, removes the IP context name to be used for web authorization.
context_name
context_name
must be an alphanumeric string of 1 to 79 characters.
Usage
Use this command to configure the name of the context where the IP pool configuration needs to be obtained
from and provide the VPN through which the URL to the portal can be reached during the SaMOG web
authorization pre-authentication phase, or the data can be offloaded for Local Breakout. If the IP context
name is not configured here, and the AAA server does not provide one, the VPN context of the SaMOG
service will be used.
from and provide the VPN through which the URL to the portal can be reached during the SaMOG web
authorization pre-authentication phase, or the data can be offloaded for Local Breakout. If the IP context
name is not configured here, and the AAA server does not provide one, the VPN context of the SaMOG
service will be used.
Important:
This command is license dependent. Contact your Cisco account representative for more information
on SaMOG feature license requirements.
Example
The following command configures the IP context name of
wacxt
ip context-name wacxt