Cisco Cisco Packet Data Gateway (PDG)
BGP Configuration Mode Commands
address-family ipv6 ▀
Command Line Interface Reference, StarOS Release 17 ▄
1643
address-family ipv6
Enters the IPv6 Address Family configuration mode. Optionally, it also enables the Virtual Routing and Forwarding
(VRF) routing configuration mode, if specified.
(VRF) routing configuration mode, if specified.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > BGP Configuration
configure > context context_name > router bgp as_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-bgp)#
Syntax
[ no ] address-family ipv6 [ vrf vrf_name ]
no
Removes the configured IPv6 address family VRF mode.
address-family ipv6
Enters the BGP Address-Family IPv6 mode to allow entry of IPv6 BGP parameters.
vrf
vrf_name
Enables the exchange of VRF routing information. When this keyword is specified with this command, the
address family mode changes to VRF address family mode.
address family mode changes to VRF address family mode.
vrf_name
is the name of an existing VFR
expressed as an alphanumeric string of 1 through 63 characters.
Usage
Use this command to configure the IPv6 BGP address family configuration parameters for BGP router.
Use of the
Use of the
address-family ipv6
command switches the command mode to BGP Address Family
Configuration Mode and changes the CLI prompt to:
[context_name>]host_name(config-bgp-af-v6)#
Example
Use the following command to enter the IPv6 BGP Address-Family configuration mode:
address-family ipv6