Cisco Cisco Packet Data Gateway (PDG)
Context Configuration Mode Commands E-H
▀ gtpp storage-server
▄ Command Line Interface Reference, StarOS Release 17
2472
gtpp storage-server
Configures information for the GTPP back-up storage server.
Product
GGSN
P-GW
SAEGW
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] gtpp storage-server ip-address port port-num
no
Removes a previously configured back-up storage server.
ip-address
Specifies the IP address of the back-up storage server expressed in IPv4 dotted-decimal notation.
port port-num
Specifies the UDP port number over which the GSN communicates with the back-up storage server. Default:
3386
3386
Usage
This command configures the information for the server to which GTPP packets are to be backed up to if all
the CGFs are unreachable.
One backup storage server can be configured per system context.
the CGFs are unreachable.
One backup storage server can be configured per system context.
Important:
This command only takes affect if
gtpp single-source
in the Global Configuration Mode is also
configured. Additionally, this command is customer specific. Please contact your local sales representative for
additional information.
additional information.
Example
The following command configures a back-up server with an IP address of
192.168.1.2
:
gtpp storage-server 192.168.1.2