Cisco Cisco Packet Data Gateway (PDG)
Context Configuration Mode Commands N-R
▀ radius authenticator-validation
▄ Command Line Interface Reference, StarOS Release 17
2694
radius authenticator-validation
This command enables (allows) or disables (prevents) the MD5 authentication of RADIUS users. By default this feature
is enabled.
is enabled.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ default | no ] radius authenticator-validation
default
Enables MD5 authentication validation for an Access-Request message to the AAA server.
no
Disables MD5 authentication validation for an Access-Request message to the AAA server.
Usage
Use this command to disable, or re-enable, sending Access-Request messages to the AAA server for MD5
validation.
validation.
Example
The following command disables MD5 authentication validation for Access-Request messages for user
names (NAI):
names (NAI):
no radius authenticator-validation
The following command enables MD5 authentication validation for Access-Request messages for user names
(NAI):
(NAI):
radius radius authenticator-validation