Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (A-C)
▀ clear radius counters
▄ Command Line Interface Reference, StarOS Release 17
3930
clear radius counters
Clears statistics for RADIUS servers or a server group. The statistics for all RADIUS servers or a server group may be
cleared.
cleared.
Product
PDSN
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
clear radius counters { all | radius group group_name | server ip_address [ port number ]
}
}
all | radius group group_name | server ip_address [ port number ]
all
: Clears statistics for all servers.
radius group group_name
: Clears all configured authentication/accounting servers in the specified
RADIUS group.
group_name
must be the name of server group configured in a specific context for
authentication/accounting, expressed as an alphanumeric string of 1 through 63 characters.
server ip_address [ port number ]
: Clears statistics only for the server specified using IPv4 dotted-
decimal or IPv6 colon-separated-hexadecimal notation. Optionally, you can specify the port which is to have
its RADIUS statistics cleared as an integer from 0 through 65535.
its RADIUS statistics cleared as an integer from 0 through 65535.
Usage
Clears all the configured RADIUS servers’ statistics to reset them to zero prior to logging or monitoring the
system for troubleshooting, performance measurements, etc.
Note that this CLI command will clear all the statistics associated with the configured RADIUS accounting
and authentication servers except these two counters –
system for troubleshooting, performance measurements, etc.
Note that this CLI command will clear all the statistics associated with the configured RADIUS accounting
and authentication servers except these two counters –
Access Request current consecutive failures in a mgr
Accounting-Request Current Consecutive Failures in a mgr
Example
The following command clears the statistics for all RADIUS servers.
clear radius counters all
The following command resets the statistics only for the server
10.2.3.4
.