Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (D-S)
debug ipv6 ospf nsm ▀
Command Line Interface Reference, StarOS Release 17 ▄
4033
debug ipv6 ospf nsm
Enables or disables troubleshooting OSPFv3 Neighbor State Machines (NSMs), based on the specific NSM information
type. If no keyword is specified, all NSM information types are enabled. If logging is enabled, results are sent to the
logging system.
type. If no keyword is specified, all NSM information types are enabled. If logging is enabled, results are sent to the
logging system.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
[ no ] debug ipv6 ospf nsm [ interface | redistribute ]
no
Disables the debugging the specified NSM information type. If no keyword is specified, all information types
are disabled.
are disabled.
interface
Enables debugging NSM on this interface.
redistribute
Enables debugging NSM redistribution information.
Usage
Use this command to output debug information for OSPFv3 NSMs
Example
To enable all NSM debug information, enter the following command;
debug ipv6 ospf nsm
To disable all NSM debug information, enter the following command;
no debug ipv6 ospf nsm