Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (A-C)
▀ show bssgp status
▄ Command Line Interface Reference, StarOS Release 17
4388
show bssgp status
Displays the traffic status through the BSSGP (base station subsystem GPRS protocol) layer between the base station
subsystem (BSS) and the SGSN over the Gb interface.
subsystem (BSS) and the SGSN over the Gb interface.
Product
SGSN
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show bssgp status { bvc-bucket nsei nse_id bvci bvc_id | bvc-stat nsei nse_id bvci bvc_id
} [ | { grep grep_options | more } ]
} [ | { grep grep_options | more } ]
bvc-bucket nseinse_id bvci bvc_id
Displays traffic status for a specific BVC bucket identified by the NSEI (network service entity ID) and
BVCI (BSSGP virtual connection ID).
BVCI (BSSGP virtual connection ID).
nse_ID
is an integer from 0 through 65535.
bvc_ID
is an integer from 0 through 65000.
bvc-stat nseinse_id bvci bvc_id
Displays traffic status for a BVC identified by the NSEI (network service entity ID) and BVCI (BSSGP
virtual connection ID).
virtual connection ID).
nse_ID
is an integer from 0 through 65535.
bvc_ID
is an integer from 0 through 65000.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to display BVC status of the BBSGP layer for specified NSEI and BVCI.
Example
The following command displays BSSGP traffic status for the BVC bucket for NSEI
2556
BVCI
241
.
show bssgp status bvc-bucket nsei 2556 bvci 241
Important:
Descriptions for show command outputs are available in the Statistics and Counters Reference.