Cisco Cisco Packet Data Gateway (PDG)
HSGW Service Configuration Mode Commands
spi remote-address ▀
Command Line Interface Reference, StarOS Release 17 ▄
6287
spi remote-address
Configures the security parameter index (SPI) between the HSGW service and the evolved Access Network/evolved
Packet Control Function (eAN/ePCF). This command also configures the redirection of calls based on the PCF zone.
Packet Control Function (eAN/ePCF). This command also configures the redirection of calls based on the PCF zone.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration
configure > context context_name > hsgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hsgw-service)#
Syntax
spi remote-address { pcf_ip_address | ip_addr_mask_combo } spi-number number { encrypted
secret enc_secret | secret secret } [ description string ] [ hash-algorithm { md5 |
rfc2002-md5 } ] [ replay-protection { nonce | timestamp } ] [ timestamp-tolerance
tolerance ] [ zone zone_id ]
secret enc_secret | secret secret } [ description string ] [ hash-algorithm { md5 |
rfc2002-md5 } ] [ replay-protection { nonce | timestamp } ] [ timestamp-tolerance
tolerance ] [ zone zone_id ]
no spi remote-address pcf_ip_address spi-number number
pcf_ip_address | ip_addr_mask_combo
pcf_ip_address
: Specifies the IP address of the ePCF.
pcf_ip_address
is an IP address expressed in
IPv4 dotted decimal notation or IPv6 colon separated notation.
ip_addr_mask_combo
: Specifies the IP address and mask bits of the PCF.
ip_addr_mask_combo
must be
specified using the form “IP Address/Mask Bits” where the IP address must in IPv4 dotted-decimal or IPv6
colon-separated notation, and the mask bits are a numeric value corresponding to the number of bits in the
subnet mask.
colon-separated notation, and the mask bits are a numeric value corresponding to the number of bits in the
subnet mask.
spi-number
number
Specifies the SPI which indicates a security context between the PCF and the HSGW as an integer from 256
through 4294967295.
through 4294967295.
encrypted secret
enc_secret
|
secret
secret
Configures the shared-secret between the HSGW service and the PCF. The secret can be either encrypted or
non-encrypted.
non-encrypted.
encrypted secret
enc_secret
: Specifies the encrypted shared key (
enc_secret
) between the PCF and
the HSGW service.
enc_secret
must be between 1 and 236 alpha and/or numeric characters and is case
sensitive.
secret
secret
: Specifies the shared key (secret) between the PCF and the HSGW services.
secret
must
be between 1 and 127 alpha and/or numeric characters and is case sensitive.
The
The
encrypted
keyword is intended only for use by the chassis while saving configuration scripts. The
system displays the
encrypted
keyword in the configuration file as a flag that the variable following the