Cisco Cisco Packet Data Gateway (PDG)

Seite von 8994
  LMA Service Configuration Mode Commands 
refresh-interval-percent  ▀   
 
Command Line Interface Reference, StarOS Release 17  ▄  
 
   
6869 
refresh-interval-percent 
Configures percentage of the granted registration lifetime to be used in the refresh interval mobility option in a binding 
acknowledgement message sent by the LMA service. 
Product
 
P-GW 
SAEGW 
Privilege
 
Administrator 
Syntax
 
refresh-interval-percent number 
default refresh-interval-percent 
default
 
Resets the command value to the default setting of 75. 
number
 
Default: 75 
Sets the percent value for session lifetimes for this service. 
number
 must be an integer value from 1 to 99. 
Usage 
Use this command to configure the amount of the granted registration lifetime to be used in the refresh 
interval mobility option in the binding acknowledgement message sent by the LMA service to the requesting 
MAG. 
Refreshing a binding or registration is based on the granted registration lifetime. Since a refresh request must 
be within the granted range of a registration lifetime, this command provides a method of setting the interval 
of when a refresh request is sent. 
As described in RFC 3775 “Mobility Support in IPv6”, if a binding refresh advice option is present in the 
binding acknowledgement, the refresh interval field in the option must be a value less than the binding 
lifetime (also returned in the binding acknowledgement). The mobile node then should attempt to refresh its 
registration at the shorter refresh interval. The home agent will still honor the registration for the lifetime 
period, even if the mobile node does not refresh its registration within the refresh period. 
Important:
  Refer to the refresh-advice-option and reg-lifetime commands for a complete understanding of 
registration (binding) lifetimes and refresh intervals. 
Example
 
The following command sets the refresh interval percent to 
90
refresh-interval-percent 90