Cisco Cisco Packet Data Gateway (PDG)
P-GW Service Configuration Mode Commands
▀ session-delete-delay
▄ Command Line Interface Reference, StarOS Release 17
7960
session-delete-delay
Configures a delay in terminating a session.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pgw-service)#
Syntax
session-delete-delay timeout [ msec ]
{ default | no } session-delete-delay timeout
default
Resets the command to the default setting of 10000 milliseconds.
no
Disables the feature.
timeout msec
Default: 10000
Specifies the time to retain the session (in milliseconds) before terminating it.
Specifies the time to retain the session (in milliseconds) before terminating it.
msec
must be an integer from 1000 to 60000.
Usage
Use this command to set a delay to provide session continuity in break-before-make scenarios.
Example
The following command sets the session delete delay to the default setting of 10,000 milliseconds:
session-delete-delay timeout