Cisco Cisco Packet Data Gateway (PDG)
S-GW Service Configuration Mode Commands
▀ accounting mode
▄ Command Line Interface Reference, StarOS Release 17
8604
accounting mode
Configures the mode to be used for accounting – GTPP (default), RADIUS/Diameter or None for S-GW service.
Product
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > S-GW Service Configuration
configure > context context_name > sgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgw-service)#
Syntax
[ default ] accounting mode { gtpp | none | radius-diameter }
default
Sets the accounting mode to GTPP.
gtpp
Specifies that GTPP accounting is performed. This is the default mode.
none
Specifies that no accounting will be performed for the S-GW service.
radius-diameter
Specifies that RADIUS/Diameter will be performed for the S-GW service.
Usage
Use this command to specify the accounting mode for the S-GW service. However, an accounting mode
configured for the call-control profile will override this setting. For additional information on accounting
mode and its relationship to operator policy, refer to the Serving Gateway Administration Guide.
configured for the call-control profile will override this setting. For additional information on accounting
mode and its relationship to operator policy, refer to the Serving Gateway Administration Guide.
Example
The following command specifies that RADIUS/Diameter accounting will be used for the S-GW service:
accounting mode radius-diameter