Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
active-charging bandwidth-policy ▀
Command Line Interface Reference, StarOS Release 16 ▄
1263
active-charging bandwidth-policy
Configures the bandwidth policy to be used for subscribers who use this APN.
Product
ACS
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
active-charging bandwidth-policy bandwidth_policy_name
{ default | no } active-charging bandwidth-policy [ fallback-enabled ]
default
Configures the default setting.
Default: The default bandwidth policy configured in the rulebase is used for subscribers who use this APN.
Default: The default bandwidth policy configured in the rulebase is used for subscribers who use this APN.
no
Disables bandwidth control for the APN.
bandwidth-policy
bandwidth_policy_name
Specifies the bandwidth policy name.
bandwidth_policy_name
must be an alphanumeric string from 1
through 63 characters.
fallback-enabled
Determines whether policy under rulebase can be applied as a fallback value. Fallback is disabled by default.
Usage
Use this command to configure bandwidth policy to be used for subscribers who use this APN.
Example
The following command configures a bandwidth policy named
standard
for the APN:
active-charging bandwidth-policy standard [ fallback-enabled ]