Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
▀ selection-mode
▄ Command Line Interface Reference, StarOS Release 16
1418
selection-mode
Configures the level of verification that will be used to ensure a mobile station’s subscription to use this APN.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
selection-mode { chosen-by-sgsn | sent-by-ms | subscribed } +
default selection-mode
default
Sets the default selection mode as “subscribed”.
chosen-by-sgsn
Default: Disabled
The MS’s subscription will not be verified and the APN will be provided by the SGSN.
The MS’s subscription will not be verified and the APN will be provided by the SGSN.
sent-by-ms
Default: Disabled
The MS’s subscription will not be verified and the APN will be provided by the MS.
The MS’s subscription will not be verified and the APN will be provided by the MS.
subscribed
Default: Enabled
The MS’s subscription will be verified by the SGSN.
The MS’s subscription will be verified by the SGSN.
+
More than one of the above keywords can be entered within a single command.
Usage
Use this command to specify the level of verification that will be used to ensure a MS’s subscription to use
this APN. This setting must mach the corresponding setting on the SGSN. If the two settings are not identical,
the GGSN rejects the session with a cause code of 201 (D1H, User authentication failed).
this APN. This setting must mach the corresponding setting on the SGSN. If the two settings are not identical,
the GGSN rejects the session with a cause code of 201 (D1H, User authentication failed).