Cisco Cisco Packet Data Gateway (PDG)

Seite von 8770
  DHCPv6 Server Configuration Mode Commands 
preferred-lifetime  ▀   
 
Command Line Interface Reference, StarOS Release 16  ▄  
 
   
3393 
preferred-lifetime 
Configures the preferred lifetime for prefixes assigned by the DHCPv6 service. 
Product
 
GGSN 
P-GW 
SAEGW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > DHCPv6 Service Configuration > DHCPv6 Server 
Configuration 
configure > context context_name > dhcpv6-service service_name > dhcpv6-server
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-dhcpv6-server)# 
Syntax
 
preferred-lifetime pref_lifetime 
default preferred-lifetime 
default
 
Returns the command to its default setting of 900. 
pref_lifetime
 
Specifies the preferred lifetime (in seconds) for prefixes assigned by the DHCPv6 service. 
pref_lifetime 
must be an integer value from 1 through 1932100.  
Default: 900 
Usage 
Use this command to specify the preferred lifetime for prefixes assigned by the DHCPv6 service. 
Example
 
The following command configures the preferred lifetime for 
1001
 seconds: 
preferred-lifetime 1001