Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (A-C)
configure ▀
Command Line Interface Reference, StarOS Release 16 ▄
3913
configure
Sets the mode to the global configure mode. May also be used to set the mode to the configure mode and pre-load the
configuration referred to by the options.
configuration referred to by the options.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
configure [ url [ verbose ] ]
url
Specifies the location of a configuration file to pre-load.
url
may refer to a local or a remote file.
url
must
be entered using the following format:
For the ASR 5000:
For the ASR 5000:
[ file: ]{ /flash | /pcmcia1 | /hd } [ /directory ]/file_name
tftp://{ host[ :port# ] } [ /directory ]/file_name
[ http: | ftp: | sftp: ]//[ username [ :password
] @ ] { host } [ :port# ] [
/directory ]/file_name
For the ASR 5500:
[ file: ]{ /flash | /usb1 | /hd } [ /directory ]/file_name
tftp://{ host[ :port# ] } [ /directory ]/file_name
[ http: | ftp: | sftp: ]//[ username [ :password
] @ ] { host } [ :port# ] [
/directory ]/file_name
Important:
Use of the SMC hard drive is not supported in this release.
Important:
Do not use the following characters when entering a string for the field names below: “/” (forward
slash), “:” (colon) or “@” (at sign).
directory
is the directory name.
filename
is the actual file of interest.
username
is the user to be authenticated.
password
is the password to use for authentication.
host
is the IP address or host name of the server.
port#
is the logical port number that the communication protocol is to use.