Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (D-S)
▀ ppp echo-test
▄ Command Line Interface Reference, StarOS Release 16
4052
ppp echo-test
Sends link control protocol (LCP) keep-alive echo packet to the peer point-to-point protocol (PPP) connection to verify
proper communication between PPP connections, and awaits a response.
proper communication between PPP connections, and awaits a response.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
ppp echo-test { callid call_id | imsi imsi_id | ipaddr ip_address | msid ms_id | username
user_name } [ num_packets ] [ | { grep grep_options | more } ]
user_name } [ num_packets ] [ | { grep grep_options | more } ]
callid
call_id
Specifies the call instance ID for which the PPP link must be verified as a 4-byte hexadecimal number.
imsi
imsi_id
Specifies the International Mobile Subscriber Identifier (IMSI) for which the PPP link must be verified.
ipaddr
ip_address
Specifies the IP address for which the PPP link must be verified in IPv4 dotted-decimal notation.
msid
ms_id
Specifies the mobile subscriber ID for which the PPP link must be verified as 7 to 16 digits of an MIN, or
RMI.
RMI.
username
user_name
Specifies an existing user for which the PPP link must be verified as an alphanumeric string of 1 through 127
characters.
characters.
num_packets
Specifies the number of test packets to generate an integer from 1 through 1000000. Default: 1
grep
grep_options
|
more
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in Command Line Interface Reference.