Cisco Cisco Packet Data Gateway (PDG)
GGSN Service Configuration Mode Commands
▀ sgsn address
▄ Command Line Interface Reference, StarOS Release 16
5126
sgsn address
Configures the SGSNs that this GGSN service is allowed to communicate with.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
sgsn address { { ip_address [ subnetmask netmask ] } | ip_address/netmask } [ plmn-
foreign [ reject-foreign-subscriber ] | mcc mcc_code mnc mnc_code [ reject-foreign-
subscriber ] ] [ rat-type { GAN | GERAN | HSPA | UTRAN | WLAN } ] [ description
description ] [ disable-gtpc-echo ]
foreign [ reject-foreign-subscriber ] | mcc mcc_code mnc mnc_code [ reject-foreign-
subscriber ] ] [ rat-type { GAN | GERAN | HSPA | UTRAN | WLAN } ] [ description
description ] [ disable-gtpc-echo ]
no sgsn { address ip_address [ subnetmask netmask ] }
no
Removes a specific SGSN from the list or all configured SGSNs.
address
Configures the IP address of the SGSN.
ip_address
must be expressed in IPv4 dotted-decimal notation.
subnetmask
Configures the subnet mask of the SGSN.
netmask
must be expressed in IPv4 dotted-decimal notation.
disable-gtpc-echo
Default: Send GTPC Echo messages to unlisted SGSNs.
When this keyword is specified, GTPC echo messages are not sent to unlisted SGSNs.
When this keyword is specified, GTPC echo messages are not sent to unlisted SGSNs.
plmn-foreign
Indicates whether or not the SGSN belongs to a foreign public land mobile network (PLMN).
reject-foreign-subscriber
Default: Disabled
Specifies that incoming calls from foreign subscribers are rejected.
Specifies that incoming calls from foreign subscribers are rejected.