Cisco Cisco Packet Data Gateway (PDG)
LNS Service Configuration Mode Commands
max-tunnel-challenge-length ▀
Command Line Interface Reference, StarOS Release 16 ▄
6789
max-tunnel-challenge-length
Sets the maximum length of the tunnel challenge in bytes. The challenge is used for authentication purposes during
tunnel creation.
tunnel creation.
Product
PDSN
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > LNS Service Configuration
configure > context context_name > lns-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-lns-service)#
Syntax
max-tunnel-challenge-length bytes
bytes
Default: 16
Specifies the number of bytes to set the maximum length of the tunnel challenge as an integer from 4 through
32.
Specifies the number of bytes to set the maximum length of the tunnel challenge as an integer from 4 through
32.
Usage
Use this command to set the maximum length, in bytes, for the tunnel challenge that is used during tunnel
creation.
creation.
Example
The following command sets the maximum length of the tunnel challenge to
32
bytes:
max-tunnel-challenge-length 32