Cisco Cisco Packet Data Gateway (PDG)
MAG Service Configuration Mode Commands
renew-percent-time ▀
Command Line Interface Reference, StarOS Release 16 ▄
7003
renew-percent-time
Configures percentage of lifetime at which a registration renewal is sent to the Local Mobility Anchor (LMA).
Product
HSGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MAG Service Configuration
configure > context context_name > mag-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mag-service)#
Syntax
renew-percent-time percent
default renew-percent-time
default
Resets the command to the default value of 75.
percent
Default: 75
Specifies the time percentage when the registration renewal is sent to the LMA.
Specifies the time percentage when the registration renewal is sent to the LMA.
percent
is a percentage
value of the registration lifetime expressed as an integer from 1 through 100.
Usage
Use this command to specify when a registration renewal is sent to the LMA for subscribers using this
service.
If the registration lifetime is 600 seconds (10 minutes) and this command is set to 75 (percent), then the
registration renewal message is sent after 450 seconds of the registration lifetime has expired.
service.
If the registration lifetime is 600 seconds (10 minutes) and this command is set to 75 (percent), then the
registration renewal message is sent after 450 seconds of the registration lifetime has expired.
Example
The following command sets the registration renewal time for subscribers using this service to
90
percent of
the registration lifetime:
renew-percent-time 90