Cisco Cisco Packet Data Gateway (PDG)
PCC-Service Configuration Mode Commands
▀ data-service
▄ Command Line Interface Reference, StarOS Release 16
7582
data-service
This command creates a new service for data, data-service, or modify a pre-configured data-service and enters the PCC-
Data-Service Configuration Mode. This command can also be used to delete an existing PCC-Data-Service.
Data-Service Configuration Mode. This command can also be used to delete an existing PCC-Data-Service.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration
configure > context context_name > pcc-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-service)#
Syntax
data-service data_svc_name [-noconfirm]
no data-service data_svc_name
no
Removes the configured PCC-Data-Service from a PCC-service instance for IPCF configuration.
data_svc_name
Identifies the name of the PCC-Data-Service which is to be created or modified through this command.
The
The
data_svc_name
must be an alphanumerical string from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
Use this command to create and configure a PCC-data-service in a PCC-service instance for IPCF
configuration.
A PCC-Data-Service defines the flows for the media data as well as corresponding attributes that are
necessary for the charging as well as policy enforcement decisions for the kind of media represented by its
Service-Flows.
A maximum of 256 PCC-Data-Services can be configured in 1 instance of PCC-Service.
Entering this command results in the following prompt:
configuration.
A PCC-Data-Service defines the flows for the media data as well as corresponding attributes that are
necessary for the charging as well as policy enforcement decisions for the kind of media represented by its
Service-Flows.
A maximum of 256 PCC-Data-Services can be configured in 1 instance of PCC-Service.
Entering this command results in the following prompt:
[context_name]hostname(config-pcc-data-service))#
The commands configured in this mode are defined in the PCC-Data Service Configuration Mode Commands
chapter of Command Line Interface Reference.
chapter of Command Line Interface Reference.