Cisco Cisco Packet Data Gateway (PDG)
PDIF Service Configuration Mode Commands
▀ aaa authentication
▄ Command Line Interface Reference, StarOS Release 16
7680
aaa authentication
Sets the aaa authentication for first and second phase authentication when multiple authentication is configured on the
system.
system.
Product
PDIF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDIF Service Configuration
configure > context context_name > pdif-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdif-service)#
Syntax
aaa authentication { { first-phase | second-phase } | { context-name name aaa-group name
} }
} }
no aaa authentication { first-phase | second-phase }
no aaa authentication { first-phase | second-phase }
Removes any existing authentication configuration.
first-phase context-name
name
aaa-group
name
Specifies the context name and the aaa group name configured in the context for the first authentication
phase.
phase.
Important:
First phase authentication is mandatory when multiple authentication is
configured on the system.
context-name
name
: Specifies the context where the aaa server group is defined as an alphanumeric
string of 1 through 79 characters.
aaa-group
name
: Specifies the name of the aaa-group to be used for authentication as an
alphanumeric string of 1 through 79 characters.
second-phase context-name
name
aaa-group
name
Specifies the context name and the aaa group name configured in the context for the second authentication
phase.
phase.
context-name
name
: Specifies the context where aaa server group is defined as an alphanumeric
string of 1 through 79 characters.
aaa-group
name
: Specifies the name of the aaa-group to be used for authentication as an
alphanumeric string of 1 through 63 characters.