Cisco Cisco Packet Data Gateway (PDG)
PVC Interface Configuration Mode Commands
ip ospf network ▀
Command Line Interface Reference, StarOS Release 16 ▄
7911
ip ospf network
Configures the OSPF network type.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PVC Interface Configuration
configure > context context_name > interface interface_name point-to-point
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-pvc)#
Syntax
ip ospf network { broadcast | non-broadcast | point-to-multipoint | point-to-point }
no ip ospf network
no
Disable this function.
broadcast
Sets the network type to broadcast.
non-broadcast
Sets the network type to non-broadcast multi access (NBMA).
point-to-multipoint
Sets the network type to point-to-multipoint.
point-to-point
Sets the network type to point-to-point.
Usage
Use this command to specify the OSPF network type.
Example
To set the OSPF network type to broadcast, enter the following command;
ip ospf network broadcast
To disable the OSPF network type, enter the following command;
no ip ospf network