Cisco Cisco Packet Data Gateway (PDG)
SCTP Parameter Template Configuration Mode Commands
sctp-rto-max ▀
Command Line Interface Reference, StarOS Release 16 ▄
8181
sctp-rto-max
Configures the maximum time for SCTP retransmission timeouts (RTOs).
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > SCTP Parameter Template Configuration
configure > sctp-param-template template_name
Entering the above command sequence results in the following prompt:
[local]host_name(sctp-param-template)#
Syntax
sctp-rto-max value
default sctp-rto-max
default
Returns the command to its default setting of 600 (60000 milliseconds).
value
Specifies the maximum time for SCTP RTOs as an integer from 5 through 1200. The granularity is in 100ms
increments (120 = 12000ms). Default: 600 (60000 milliseconds)
increments (120 = 12000ms). Default: 600 (60000 milliseconds)
Usage
Use this command to configure the maximum time for SCTP RTOs.
Example
The following command configures the maximum time for SCTP RTOs to 120000ms:
sctp-rto-max 120