Cisco Cisco Packet Data Gateway (PDG)
SLs Service Configuration Mode Commands
▀ max-retransmissions
▄ Command Line Interface Reference, StarOS Release 16
8432
max-retransmissions
Configures the maximum number of times the MME will resend messages to the E-SMLC.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > SLs Service Configuration
configure > context context_name > sls-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sls-service)#
Syntax
max-retransmissions reset retries
default max-retransmissions reset
default
Resets the command to the default of 0 (zero).
reset
Configures the maximum number of times the MME will resend the RESET REQUEST to the E-SMLC
retries
must be an integer from 1 to 5. The default setting is 0.
Usage
Use this command to configure the maximum number of times the MME will resend the RESET REQUEST
to the E-SMLC.
Refer to the
to the E-SMLC.
Refer to the
t-3x02
command to configure the timer settings for resending the Reset Request message to the
E-SMLC.