Cisco Cisco Packet Data Gateway (PDG)
MME Changes in Release 17
MME Enhancements for 17.0 ▀
Release Change Reference, StarOS Release 17 ▄
313
Total TX: 0 Total RX: 0
Initial TX: 0 Initial RX: 0
Accepted: 0 Accepted: 0
Denied: 0 Denied: 0
Retrans TX: 0 Discarded: 0
show mme-service statistics
The output of the show mme-service statistics command now displays the following counters for signaling node
restoration events.
restoration events.
Paging Initiation for SIGNALING Node Restoration Events:
Attempted: 0 Success: 0
Failures: 0
Success at Last n eNB: 0 Success at Last TAI: 0
Success at TAI List: 0
show apn-profile full all
The output of this command now displays the restoration priority configured for each APN.
APN Restoration Priority
show lte-policy lte-emergency-profile name
The output of
show lte-policy lte-emergency-profile name
name
now displays the APN restoration priority
configured for emergency sessions.
The following sample output shows the configuration of a LTE Emergency Profile named lte123 which defines APN
abcd.com with node restoration priority of 1:
abcd.com with node restoration priority of 1:
Lte Emergency Profile lte123
ue-validation-level none
apn abcd.com pdn-type ipv4
restoration-priority 1
show lte-policy paging-map name
The output of
show lte-policy paging-map name
name
now displays the precedence value and paging profile
configured for node restoration paging traffic.
The following sample output shows a paging map where node restoration paging traffic is assigned a precedence of 2,
and paging is performed according to the paging profile named ltepp:
and paging is performed according to the paging profile named ltepp:
===================================================================
Paging Map : pm1