Cisco Cisco Packet Data Gateway (PDG)
P-GW Changes in Release 17
▀ P-GW Enhancements for 17.3
▄ Release Change Reference, StarOS Release 17
360
This new CLI command introduces 100 millisecond (ms) timer granularity for the T3 timer.
The range for the T3 value was 1 to 20 seconds, with a default value of 5 seconds. The new range is 1000 to 20000 ms,
with increments of 100 ms.
with increments of 100 ms.
configure
context context_name
egtp-service service_name
gtpc retransmission-timeout-ms retransmit_time
default gtpc retransmission-timeout-ms
end
Notes:
default: Configures the default control packet retransmission timeout in GTP.
retransmit_time:
Specifies the GTP control packet retransmission timeout in milliseconds. Must be an
integer from 1000 to 20000, with increments of 100.
Default: 5000
retransmission-timeout-ms
This new CLI command introduces 100 millisecond (ms) timer granularity for the T3 timer.
The range for the T3 value was 1 to 20 seconds, with a default value of 5 seconds. The new range is 1000 to 20000 ms,
with increments of 100 ms.
with increments of 100 ms.
configure
peer-profile service-type [ ggsn-access | pgw-access | sgw-access | sgw-network ] name
peer_profile_name
peer_profile_name
gtpc-service service_name
gtpc retransmission-timeout-ms retransmit_time
default gtpc retransmission-timeout-ms
end
Notes:
default: Configures the default control packet retransmission timeout in GTP.
retransmit_time:
Specifies the GTP control packet retransmission timeout in milliseconds. Must be an
integer from 1000 to 20000, with increments of 100.
Default: 5000