Cisco Cisco Packet Data Gateway (PDG)

Seite von 655
SGSN Changes in Release 17   
▀  SGSN Enhancements for 17.0 
 
 
▄  Release Change Reference, StarOS Release 17 
512 
   
With the modified 
policy
 keyword, the operator associates the SGSN’s congestion-response action-profile with each 
of 3 possible levels of congestion - critical, major, and minor.  
configure 
  congestion-control policy { critical | major | minor } sgsn-service action-profile 
action_profile_name 
  no congestion-control policy { critical | major | minor } sgsn-service 
  end 
Notes: 
 
no
: Removes the configured congestion-control policy information. 
 
critical | major | minor
: Identifies the level of congestion to associate with a congestion-control 
response policy. The threshold levels for critical, major and minor congestion levels are all set using the 
congestion-control threshold
 
sgsn-service
: Identifies the StarOS service type; in this case, the SGSN (Gn-SGSN and/or S4-SGSN). 
 
action_profile_name
: Enter a string of 1 to 64 alphanumeric characters to identify the congestion-action-
profile to associate with the congestion-control policy. Refer to the 
congestion-action-profile
 
command in the SGSN-Global Configuration mode to create or review the congestion-action-profiles which 
define the congestion response actions to be taken when thresholds are exceeded for the SGSN. 
 
This command can be repeated to associate a congestion-action-profile for each level of congestion severity: 
critical, major, minor. 
 
Use the 
show congestion-control configuration
 command to display the SGSN’s congestion-control 
policy with the congestion-action-profile names association with the level of congestion severity; for example:  
sgsn-service: 
 Critical Action-profile : actprof1 
congestion-control
 
New configuration command in the SGSN-Global configuration mode define congestion control practices for the SGSN 
as a whole. All of the new modes and commands within the SGSN-Global configuration mode will be identified and 
defined in this section. 
Important:
  Remember, it is the 
 congestion-control 
 command in the Global Configuration mode that 
enables / disables  congestion control. 
configure 
  sgsn-global 
     congestion-control  
        [ no ] congestion-action-profile action_profile_name 
        end