Cisco Cisco Packet Data Gateway (PDG)
P-GW Changes in Release 16
P-GW Enhancements for 16.0 ▀
Release Change Reference, StarOS Release 16 ▄
361
configure
qos l2-mapping-table { name map_table_name | system-default }
no qos l2-mapping-table name map_table_name
end
Notes:
name map_table_name
Specifies the name of an internal table from which to map QoS to L2 values.
map_table_name
must be an alphanumeric string of 0 through 80 characters.
system-default
: Configure the system default mapping.
no
: Deletes the specified L2 mapping table.
The system-default table ca not be deleted. Only named tables that were previously created using this CLI
command can be deleted.
command can be deleted.
Performance Indicator Changes
show apn statistics all
“802.1p” removed from “802.1p Priority Marking Statistics” field.
show pgw-service statistics all
“802.1p” removed from “802.1p Priority Marking Statistics” field.
show qci-qos-mapping table all
Output similar to the following is now shown for internal QoS:
uplink: internal-qos priority 5
downlink: internal-qos priority 3
show qos ip-dscp-iphb-mapping
This new command displays mapping QoS information in a packet to internal-qos marking.
show qos l2-mapping-table name
table_name
This new command displays named table for the internal to l2 mapping values, like 802.1p and mpls.
show qos l2-mapping-table system-default
This new command displays system default internal mapping to l2 values, like 802.1p and mpls.
show sgw-service statistics all
“802.1p” removed from “802.1p Priority Marking Statistics” field.