Cisco Cisco ASR 5000
SGSN-MME Combo Optimization
▀ Configuring the Combo Optimization
▄ SGSN Administration Guide, StarOS Release 18
Configuring the Combo Optimization
This section describes how to configure the Combo Optimization for an SGSN-MME combo node.
By default, Combo Optimization is not enabled. This command both enables or disables Combo Optimization on an
SGSN-MME combo node.
SGSN-MME combo node.
config
lte-policy
[ no ] sgsn-mme subscriber-data-optimization
end
Note:
no
as a command prefix disables Combo Optimization.
The following CLI (applicable only to the SGSN in the combo node), under the call-control profile configuration mode,
controls requests for GPRS subscription information from the HSS:
controls requests for GPRS subscription information from the HSS:
config
call-control-profile<profile_name>
hss message update-location-request gprs-subscription-indicator [ never | non- epc-
ue ]
ue ]
end
Verifying Combo Optimization Configuration
Execute the following command to verify the configuration of this feature:
show lte-policy sgsn-mme summary
The following field value indicates if data optimization on the SGSN-MME combo node is "Enabled" or "Disabled":
subscriber-data-optimization