Cisco Cisco Packet Data Gateway (PDG)

 

▄  SaMOG Administration Guide, StarOS Release 19 

network protocol (PMIPv6), and LMA address (CGW service’s bind address) to be sent in the Cisco Vendor-specific 
attributes to WLC. The WLC uses this information to build the PMIPv6 PBU to the SaMOG gateway when the 

 option is enabled on the Cisco WLC. These attributes are not sent when the custom70 dictionary is 

configured. 

Notes: 



 

Use the 

command to configure Layer 3 IP access-type only. 



 

When the 

associate dhcpv6-service dhcpv6_service_name

 is configured, SaMOG will use the bind 

address configured under the DHCPv6 Service Configuration Mode for DHCPv6 server functionality.  

The LTE Policy Configure the LTE policy by applying the example configuration below. 

config 

   operator-policy policy-name 

      apn network-identifier apn_net_id apn-profile apn_profile_name 

      associate call-control-profile profile_id 

      exit  

   call-control-profile profile_name 

      accounting mode gtpp 

      authenticate context context_name aaa-group aaa_group_name 

      accounting context context_name aaa-group aaa_group_name 

      accounting context context_name gtpp-group gtpp_group_name 

      assocaite accounting-policy policy_name  

      exit 

   apn-profile profile_name 

      accounting mode none 

      local-offload 

      address-resolution-mode local 

      pgw-address IP_address 

      qos default-bearer qci qci_id 

      qos default-bearer arp arp_value preemption-capability may vulnerability not-
preemptable