Cisco Cisco Packet Data Gateway (PDG)
show card
▀ show card info (VPC-SI, VPC-DI)
▄ Statistics and Counters Reference, StarOS Release 18
3402
show card info (VPC-SI, VPC-DI)
Table 256.
show card info (VPC-SI, VPC-DI)
Command Output Descriptions
Field
Applicable
Card(s)
Description
Slot Type
Virtual
Displays the acronym for the card type.
Card Type
Virtual
Indicates the type of card installed.
Operational State
Virtual
Displays the operational state of the card. The possible operational states are:
Active: Indicates that the card is an active component that will be used to process
subscriber data sessions.
subscriber data sessions.
Standby: Indicates that the card is a redundant component. Redundant components
will become active through manual configuration or automatically should a failure
occur.
will become active through manual configuration or automatically should a failure
occur.
Offline: Indicates that the card is installed but is not ready to process subscriber
data sessions. This could be because it is not completely installed (such as, the card
interlock switch is not locked}.
data sessions. This could be because it is not completely installed (such as, the card
interlock switch is not locked}.
Redundant With
VPC-DI CF only
VPC-DI CF only
Virtual
Indicates with which slot this CF maintains 1:1 redundancy.
Last State Change
Virtual
Displays the time of the last operational state change for the card.
Administrative
State
State
Virtual
Indicates whether or not the card has been configured for use via software. If it has been
configured, Enabled will be displayed. If not, Disabled will be displayed.
configured, Enabled will be displayed. If not, Disabled will be displayed.
Card Lock
Virtual
Displays whether or not the card’s interlock switch is Locked or Unlocked.
Reboot Pending
Virtual
Displays whether or not the card will be undergoing a reboot. If the card is being rebooted, a
Yes will be displayed. If not, a No will be displayed.
Yes will be displayed. If not, a No will be displayed.
Upgrade In
Progress
Progress
Virtual
Indicates whether an upgrade is in progress.
The following operations are not allowed while a card is upgrading:
The following operations are not allowed while a card is upgrading:
change card [no] shutdown (config)
change card active (config)
change card redundancy (config)
card halt (exec)
card reboot (exec)
start an online upgrade
Level unlock operations are ignored while a card is upgrading.
Session Busy-Out
Not supported for
VPC-DI, CF
Not supported for
VPC-DI, CF
Virtual
Indicates whether a busy-out command has been initiated (Enabled or Disabled).