Cisco Cisco Packet Data Gateway (PDG)
show multicast-sessions
▀ show multicast-sessions all
▄ Statistics and Counters Reference, StarOS Release 18
4236
show multicast-sessions all
Table 467.
show multicast-sessions all
Command Output Descriptions
Field
Description
vvvvv
Displays service and session state information. This column provides a code consisting of three characters.
From left-to-right, the first character represents the Session Type that the subscriber is using. The possible
sessopm types are:
From left-to-right, the first character represents the Session Type that the subscriber is using. The possible
sessopm types are:
B: BCMCS
M: MBMS Multicast
R: MBMS Broadcast
From left-to-right, the second character represents the Framing Type. The possible framing types are:
H: HDLC Like
S: Segment Based
x: Not Applicable
From left-to-right, the third character represents the Flow Type. The possible flow types are:
F: Flow
P: Program
u: Unknown
From left-to-right, the fourth character represents the Call State of the session. The possible call states are:
C: Connected
c: Connecting
D: Disconnecting
u: Unknown
From left-to-right, the fifth character represents the Link Status of the session. The possible idle states are:
A: Online/Active
D: Dormant/Idle
CALLID
Displays the subscriber’s call identification (callid) number.
FLOW ID
Displays the flow identification for multicast service session.
MCAST
ADDR
ADDR
Displays the IP address of Broadcast Multicast service center.
APN/PORT
Displays the APN name or port number through which the multicast services is provided.
PEER ADDR
Displays the IP address of Access Gateway to which the subscriber is attached.
TIME-IDLE
Displays the amount of time that the subscriber session has been idle either in an active or dormant state.