Cisco Cisco Packet Data Gateway (PDG) Merkblatt

Seite von 8487
APN Configuration Mode Commands   
▀  dns 
 
 
▄  Cisco ASR 5x00 Command Line Interface Reference 
1282 
   
dns 
Configures the Domain Name Service (DNS) servers that will be used by the APN for PPP. 
Product
 
GGSN 
P-GW 
SAEGW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > APN Configuration 
configure > context context_name > apn apn_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-apn)# 
Syntax
 
dns { primary | secondary } { address } 
no dns { primary | secondary } [ dns_address ] 
no
 
Deletes a previously configured DNS server. 
primary
 
Configures the primary DNS server for the APN. 
secondary
 
Configures the secondary DNS server for the APN. Only one secondary DNS server can be configured. 
address
 
Configures the IP address of the DNS server expressed in IPv4 dotted-decimal notation. 
Default: primary = 0.0.0.0, secondary = 0.0.0.0 
dns_address
 
Specifies the IP address of the DNS server to remove, expressed in IPv4 dotted-decimal notation. 
Usage 
DNS servers are configured on a per-APN profile basis. This allows each APN profile to use specific servers 
in processing PDP contexts. 
The configured DNS IP addresses are relayed to the subscriber within IPCP if the PDP type is PPP, or as 
PCOs (Protocol Configuration Options) if the PDP type is IP.