Cisco Cisco Packet Data Gateway (PDG) Merkblatt
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
APN Configuration Mode Commands
outbound ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1355
outbound
Configures the APN host username and password.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
outbound { [ encrypted ] password pwd | username name }
no outbound password | username
no
Removes previously configured outbound information for the APN.
encrypted
The
encrypted
keyword is intended only for use by the chassis while saving configuration scripts. The
system displays the
encrypted
keyword in the configuration file as a flag that the variable following the
password
keyword is the encrypted version of the plain text password. Only the encrypted password is saved
as part of the configuration file.
password
pwd
Specifies the password to use for session authentication as an alphanumeric string of 1 through 132 characters
that is case sensitive.
that is case sensitive.
username
name
Specifies the username to use for session authentication as an alphanumeric string of 1 to 127 characters that
is case sensitive.
is case sensitive.
Usage
This command can be used to provide a username and password for authentication when the subscriber does
not supply one in accordance with 3GPP standards. In addition, it can be used to create a PPP session when
using L2TP to tunnel IP PDP contexts.
If only a username is specified using this command, the password is determined based on the setting of the
not supply one in accordance with 3GPP standards. In addition, it can be used to create a PPP session when
using L2TP to tunnel IP PDP contexts.
If only a username is specified using this command, the password is determined based on the setting of the
aaa constructed-nai
command in the Context Configuration mode. That command is also used to