Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Call Control Profile Configuration Mode
local-cause-code-mapping vlr-down ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
1885
local-cause-code-mapping vlr-down
Configures the cause code to send in a ATTACH ACCEPT or TAU ACCEPT to a UE that attachment to the VLR has
failed because a VLR down condition is present.
failed because a VLR down condition is present.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
local-cause-code-mapping vlr-down emm-cause-code { congestion | cs-domain-unavailable |
imsi-unknown-in-hlr | msc-temp-unreachable | network-failure }
imsi-unknown-in-hlr | msc-temp-unreachable | network-failure }
remove local-cause-code-mapping vlr-down
remove local-cause-code-mapping vlr-down
Removes the configured cause code mapping.
vlr-down emm-cause-code emm_cause_code
Specifies the EPS Mobility Management (EMM) cause code to return when a VLR down condition is
present.
present.
emm_cause_code
must be one of the following options:
congestion
cs-domain-unavailable
imsi-unknown-in-hlr
msc-temp-unreachable
- Default.
network-failure
Usage
Use this command to configure the cause code returned to a UE when a VLR down condition is present.
Related Commands:
To set the cause codes for situations where a call control profile cannot be attached to a call (for example
new-call restrictions, congestion during new call attempt, etc.), use the
new-call restrictions, congestion during new call attempt, etc.), use the
local-cause-code-mapping