Cisco Cisco Packet Data Gateway (PDG) Merkblatt
DHCP Client Profile Configuration Mode Commands
▀ enable
▄ Cisco ASR 5x00 Command Line Interface Reference
3250
enable
Enables the specified options on the DHCP client.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > DHCP Client Profile Configuration
configure > context context_name > dhcp-client-profile profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-dhcp-client-profile)#
Syntax
enable { dhcp-message-spray | rapid-commit-dhcpv4 | rapid-commit-dhcpv6 }
dhcp-message-spray
Enables DHCP client to spray a DHCP message to all configured DHCP servers in the PDN.
By default, this is disabled. With rapid commit, there can only be one server to which this can be sent.
By default, this is disabled. With rapid commit, there can only be one server to which this can be sent.
rapid-commit-dhcpv4
Enables support of the rapid commit feature for DHCPv4 client functionality.
By default, this is enabled.
By default, this is enabled.
rapid-commit-dhcpv6
Enables support of the rapid commit feature for DHCPv6 client functionality.
By default, this is enabled.
By default, this is enabled.
Usage
Use this command to enable options on the DHCP client.
Example
The following command enables support of the rapid commit feature for DHCPv6 client functionality:
enable rapid-commit-dhcpv6