Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Diameter Endpoint Configuration Mode Commands
▀ associate
▄ Cisco ASR 5x00 Command Line Interface Reference
3324
associate
This command associates/disassociates a Stream Control Transmission Protocol (SCTP) parameter template with the
Diameter endpoint.
Diameter endpoint.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration
configure > context context_name > diameter endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-diameter)#
Syntax
associate sctp-parameters-template template_name
no associate sctp-parameters-template
no
Disassociates an SCTP parameter template with the Diameter endpoint.
sctp-parameters-template template_name
Associates a previously created SCTP parameter template with the Diameter endpoint.
template_name
specifies the name for a pre-configured SCTP parameter template. For more information on SCTP parameter
templates, refer to the
templates, refer to the
sctp-param-template
command in the Global Configuration Mode Commands
chapter.
Usage
Use this command to associate a configured SCTP parameter template with the Diameter endpoint.
The SCTP parameter template allows for SCTP timer values to be configured for the interface using the
Diameter endpoint configuration. For more information on SCTP parameters, refer to the SCTP Parameter
Template Configuration Mode Commands chapter.
The SCTP parameter template allows for SCTP timer values to be configured for the interface using the
Diameter endpoint configuration. For more information on SCTP parameters, refer to the SCTP Parameter
Template Configuration Mode Commands chapter.
Important:
Only one SCTP parameter template can be associated with the Diameter endpoint configuration. The
SCTP parameter template should be configured prior to issuing this command.
Only the following parameters from the template will be associated with the endpoint. When no SCTP
parameter template is associated with the endpoint, the following default values are used:
parameter template is associated with the endpoint, the following default values are used:
sctp-cookie-life 60000
(default for the parameter template as well)
sctp-max-init-retx 5
(default for the parameter template as well)
sctp-max-path-retx 10
(default in the parameter template is 5)
sctp-rto-initial 3000
(default for the parameter template as well)
sctp-rto-max 60000
(default for the parameter template as well)