Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Exec Mode show Commands (A-C)
show active-charging flows ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
4079
control-connection { ftp | pptp | rtsp | sip | tftp }
Displays information for control connection of flows.
ftp
: Displays control connection information for the FTP flow.
pptp
: Displays control connection information for the PPTP flow.
rtsp
: Displays control connection information for the RTSP flow.
sip
: Displays control connection information for the SIP flow.
tftp
: Displays control connection information for the TFTP flow.
firewall { not-required | required }
Displays information for flows filtered by Firewall required or not required setting.
not-required
: Sessions with Firewall processing are not required.
required
: Sessions with Firewall processing are required.
flow-id flow_id
Displays concise information for specified active charging flow ID.
full
Displays all available information for the specified flows.
idle-time [ < | > | greater-than | less-than ] seconds
Displays information for flows filtered by idle time period.
< seconds
: Displays flows that have been idle less than the specified number of seconds.
> seconds
: Displays flows that have been idle more than the specified number of seconds.
greater-than seconds
: Displays flows that have been idle more than the specified number of
seconds.
less-than seconds
: Displays flows that have been idle less than the specified number of seconds.
seconds
is an integer from 0 through 4294967295.
imsi imsi_value
Displays information for an International Mobile Subscriber Identity (IMSI).
imsi_value
must be a
sequence of digits and/or wild characters.
ip-address [ server | subscriber ] [ < | > | IPv4 | greater-than | less-than ]
address
Displays information for flows filtered by IPv4 IP address.
server
: Specifies the IP address for a specific server.
subscriber
: Displays subscriber details for the IP address specified in IPv4 dotted-decimal format.
< address
: Specifies an IPv4 IP address that is less than
address
.
> address
: Specifies an IPv4 IP address that is greater than
address
.
greater-than address
: Specifies an IPv4 IP address that is greater than
address
.
less-than address
: Specifies an IPv4 IP address that is less than
address
.
address
is an IP address expressed in IPV4 dotted-decimal notation.