Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Exec Mode show Commands (H-L)
show leds ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
4471
show leds
Displays the current status of the light emitting diodes (LEDs) for a specific card or all cards.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show leds { all | card_num } [ | { grep grep_options | more } ]
all | card_num
all
: Displays the LED status for all cards.
card_num
: Displays the LED status for the card specified by its slot number.
| { grep
grep_options
| more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Display the status of the LEDs as a part of an automated periodic script which checks the LEDs of the
chassis.
chassis.
Important:
This command is not supported on all platforms.
Example
The following commands display the LED status for all cards and only card
8
, respectively.
show leds all
show leds 8
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.