Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Exec Mode show Commands (Q-S)
▀ show sndcp statistics
▄ Cisco ASR 5x00 Command Line Interface Reference
4670
show sndcp statistics
Displays statistics for the packet traffic going through the Subnetwork Dependent Convergence Protocol (SNDCP)
layer.
layer.
Product
SGSN
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show sndcp statistics [ gprs-service srvc_name ] [ verbose ] [ | { grep grep_options |
more } ]
more } ]
gprs-service srvc_name
Displays statistics for an existing GPRS service specified as an alphanumeric string of 1 through 63
characters.
characters.
verbose
Displays a more detailed level of statistics.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of the
the output will be sent.
For details on the usage of the
grep
and
more
commands, refer to the Regulating a Command’s Output
section of the Command Line Interface Overview chapter.
Usage
Use this command to display SNDCP traffic statistics. Include the
gprs-service
keyword to filter the
output to statistics for only one GPRS service.
Example
Use the following command to display all SNDCP layer traffic statistics:
show sndcp statistics verbose
Use the following command to display SNDCP layer traffic statistics for the
test1
GPRS service:
show sndcp statistics gprs-service test1
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.