Cisco Cisco Packet Data Gateway (PDG) Merkblatt

Seite von 8487
  GGSN Service Configuration Mode Commands 
bind  ▀   
 
Cisco ASR 5x00 Command Line Interface Reference  ▄  
 
   
4937 
bind 
Binds the GGSN service to a logical IP interface serving as the Gn interface. Specifies the maximum number of 
subscribers that can access this service over the interface. 
Product
 
GGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > GGSN Service Configuration 
configure > context context_name > ggsn-service service_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-ggsn-service)# 
Syntax
 
bind address ip_address 
no bind address ip_address 
no
 
Removes a previously configured binding for the GGSN service. 
ip_address
 
Specifies the IP address (address) of the interface configured as the Gn interface. 
ip_address
 is specified in 
IPv4 dotted-decimal notation. 
Usage 
Used to associate or tie the GGSN service to a specific logical IP address. The logical IP address or interface 
takes on the characteristics of a Gn interface. Only one interface can be bound to a service. The interface 
should be configured prior to issuing this command. 
Example
 
The following command would bind the logical IP interface with the address of 
192.168.3.1
 to the GGSN 
service: 
bind address 192.168.3.1 
The following command disables a binding that was previously configured: 
no bind address