Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Global Configuration Mode Commands (A-K)
congestion-control threshold system-cpu-utilization ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5079
Usage
Use this command to set the critical, major and minor threshold levels of average percent CPU utilization of
all packet processing cards available to the system as measured in 10-second intervals.
Thresholds dictate the conditions for which congestion control is to be enabled and establish limits for
defining the state of the system (congested or clear). When these thresholds are crossed, an SNMP trap is
generated (starCongestion) and, if configured, a congestion action-profile is invoked as well.
This command requires a valid product license.
all packet processing cards available to the system as measured in 10-second intervals.
Thresholds dictate the conditions for which congestion control is to be enabled and establish limits for
defining the state of the system (congested or clear). When these thresholds are crossed, an SNMP trap is
generated (starCongestion) and, if configured, a congestion action-profile is invoked as well.
This command requires a valid product license.
Example
The following command configures a minor threshold level of 25%.
congestion-control threshold system-cpu-utilitization minor 25
This setting will remain in configuration unless you specify another minor threshold level in place of 25.
The following command returns the critical, major, and minor thresholds levels to their default values:
The following command returns the critical, major, and minor thresholds levels to their default values:
default congestion-control threshold system-cpu-utilization