Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Global Configuration Mode Commands (L-S)
support collection ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
5263
support collection
Modifies and/or enables the Support Data Collector (SDC) process. If record collection has been previously disabled,
this command enables the collection activity. If the record collection is currently enabled, this command may be used to
modify the sleep-duration interval and/or the maximum number of Support Data Records (SDRs) that can be collected
and stored.
this command enables the collection activity. If the record collection is currently enabled, this command may be used to
modify the sleep-duration interval and/or the maximum number of Support Data Records (SDRs) that can be collected
and stored.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
support collection sleep-duration { hours | minutes }value max-records number_records
no support collection
default support collection
no
Removes the settings for support collection and effectively disables the SDC.
default
Resets the sleep duration and maximum number of records to their default values.
support collection
Enables the SDC.
sleep-duration { hours | minutes }value
Specifies the hours and/or minutes between record collection activity.
value
must be an integer from 1
through 1000. The default setting is one hour (60 minutes).
Important:
The period between SDRs is equal to the configured sleep-duration interval + the time taken to
collect the previous record.
max-records number_records
Specifies the maximum number of records to maintain within the record collection.
number_records
must
be an integer from 1 through 1000. When this value is exceeded, a new SDR overwrites the oldest SDR.
Default is 168.
Default is 168.