Cisco Cisco Packet Data Gateway (PDG) Merkblatt
Global Configuration Mode Commands (T-threshold phspc)
▀ threshold license remaining-sessions
▄ Cisco ASR 5x00 Command Line Interface Reference
5382
threshold license remaining-sessions
Configures alarm or alert thresholds for the percentage of session license utilization by the system.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] threshold license remaining-sessions low_thresh clear high_thresh
no
low_thresh
Disables threshold session license utilization alerts or alarms.
remaining-sessions
low_thresh
Default: 10
Specifies the low threshold session license utilization percentage that must be met or exceeded within the
polling interval to generate an alert or alarm.
Specifies the low threshold session license utilization percentage that must be met or exceeded within the
polling interval to generate an alert or alarm.
low_thresh
is an integer from 0 through 100.
clear
high_thresh
Default: 10
Specifies the high threshold session license utilization percentage that maintains a previously generated alarm
condition. If the utilization percentage rises above the high threshold within the polling interval, a clear alarm
will be generated.
Specifies the high threshold session license utilization percentage that maintains a previously generated alarm
condition. If the utilization percentage rises above the high threshold within the polling interval, a clear alarm
will be generated.
high_thresh
is an integer from 0 through 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to Specifies the low threshold.
Usage
Session license utilization thresholds generate alerts or alarms based on the utilization percentage of all
session capacity licenses during the specified polling interval.
The system uses session capacity license to dictate the maximum number of simultaneous sessions that can be
supported. There are multiple session types that require licenses. Although, a single threshold is configured
for all session types, alerts or alarms can be generated for each type.
Alerts or alarms are triggered for session license utilization based on the following rules:
session capacity licenses during the specified polling interval.
The system uses session capacity license to dictate the maximum number of simultaneous sessions that can be
supported. There are multiple session types that require licenses. Although, a single threshold is configured
for all session types, alerts or alarms can be generated for each type.
Alerts or alarms are triggered for session license utilization based on the following rules: